数值模拟在污水生物处理领域应用进展

瞿广飞; 安之; 宁平; 解若松

doi:10.13205/j.hjgc.202003017

数值模拟在污水生物处理领域应用进展

doi: 10.13205/j.hjgc.202003017

昆明理工大学环境科学与工程学院, 昆明 650500

基金项目:

国家水体污染控制与治理重大专项（2014ZX07105-001）。

详细信息

作者简介:
瞿广飞(1978-),男,博士,教授,主要研究方向为高浓度有机废水处理及资源化利用。qgflab@sina.com

计量
- 文章访问数: 278
- HTML全文浏览量: 35
- PDF下载量: 23
- 被引次数: 0
出版历程
- 收稿日期: 2018-11-30

GENERAL SURVEY ON APPLICATION OF NUMERICAL SIMULATION IN SEWAGE BIOLOGICAL TREATMENT

Faculty of Environmental Science and Engineering, Kunming University of Science and Technology, Kunming 650500, China

摘要

摘要: 随着计算机技术的发展，数值模拟在污水生物处理工艺设计、水处理设备结构优化等领域中已得到广泛应用。介绍了数值模拟技术常用的计算方法，对活性污泥法、MBR、厌氧消化等污水生物处理领域中的数值模拟研究进展进行了总结评述，讨论了模拟仿真过程中模型选择、简化假设、预测控制等关键问题。目前数值模拟在污水生物处理领域得出的多是导向性结论，将模拟与实验结合可以提升研究效率，更好地解决工程问题。
- 废水处理 /
- 数值模拟 /
- CFD技术 /
- 生物处理 /
- 计算机辅助工程
Abstract: With the rapid development of computer technology, numerical simulation has been widely used in the field of wastewater biological treatment process design and water treatment equipment structure optimization. This paper introduced the commonly used calculation methods of numerical simulation technology, and summarized the progress of numerical simulation research in the field of sewage biological treatment, such as activated sludge process, MBR, anaerobic digestion, and discussed the key issues such as model selection, simplifying assumption and predictive control in the simulation process. At present, numerical simulations techniques gave many guiding conclusions in the field of wastewater biological treatment. Combining simulation with experiments could improve research efficiency and solve engineering problems better.
- wastewater treatment /
- numerical simulation /
- CFD technologies /
- biological treatment /
- CAE

HTML全文

参考文献(34)

牛成军,甘建红.焦化废水处理技术现状与研究进展[J].化工管理,2017(8):215.

陈家庆. ANSYS FLUENT技术基础与工程应用[M]. 北京:中国石化出版社, 2014.

张莹.基于气泡流模型的曝气筒内外流动特性数值模拟[D].西安:西安建筑科技大学,2014.

程力维. 好氧颗粒反应器内泥-水-气三相流的CFD研究[D].西安:长安大学,2012.

朱奥. 污水生物脱氮过程数学模拟与应用[D].北京:北京工业大学,2013.

AMARAL A, BELLANDI G, REHMAN U, et al. Towards improved accuracy in modeling aeration efficiency through understanding bubble size distribution dynamics[J]. Water Research, 2018, 131:346-355.

LONG F, NONG X U, WANG Z Q, et al. PDA experiments and CFD simulation of a lab-scale oxidation ditch with surface aerators[J]. Chemical Engineering Research and Design, 2010, 88(1):23-33.

MOULLEC Y L, GENTRIC C, POTIER O, et al. CFD simulation of the hydrodynamics and reactions in an activated sludge channel reactor of wastewater treatment[J]. Chemical Engineering Science, 2010, 65(1):492-498.

ROSTAMI F, SHAHROKHI M, SAID M A M, et al. Numerical modeling on inlet aperture effects on flow pattern in primary settling tanks[J]. Applied Mathematical Modelling, 2011, 35(6):3012-3020.

TARPAGKOU R, PANTOKRATORAS A. CFD methodology for sedimentation tanks:the effect of secondary phase on fluid phase using DPM coupled calculations[J]. Applied Mathematical Modelling, 2013, 37(5):3478-3494.

SHAHROKHI M, ROSTAMI F, SAID M A M, et al. Numerical modeling of baffle location effects on the flow pattern of primary sedimentation tanks[J]. Applied Mathematical Modelling, 2013, 37(6):4486-4496.

MAHDI S, FATEMEH R, MD A M S, et al. The effect of baffle angle on primary sedimentation tank efficiency[J]. Canadian Journal of Civil Engineering, 2012, 39(3):293-303.

FAZAL Saima, ZHANG B P, ZHONG Z X,et al. Industrial wastewater treatment by using MBR (membrane bioreactor) review study[J]. Journal of Environmental Protection,2015,6(6):584-599.

YAN X X, WU Q, SUN J Y, et al. Hydrodynamic optimization of membrane bioreactor by horizontal geometry modification using computational fluid dynamics[J]. Bioresource Technology, 2016, 200:328-334.

YAN X X, XIAO K, LIANG S, et al. Hydraulic optimization of membrane bioreactor via baffle modification using computational fluid dynamics[J]. Bioresource Technology, 2015, 175:633-637.

WANG L L, TAO Y, MAO X Z. A novel flat plate algal bioreactor with horizontal baffles:structural optimization and cultivation performance[J]. Bioresource Technology, 2014, 164:20-27.

于艳, 樊耀波, 徐国良,等. 计算流体力学在膜技术及膜生物反应器研究中的应用[J]. 膜科学与技术, 2011, 31(1):105-112.

YANG M, YU D W, LIU M M, et al. Optimization of MBR hydrodynamics for cake layer fouling control through CFD simulation and RSM design[J]. Bioresour Technol, 2017, 227:102-111.

AMINI E, MEHRNIA M R, MOUSAVI S M, et al. Experimental study and computational fluid dynamics simulation of a full-scale membrane bioreactor for municipal wastewater treatment application[J]. Industrial & Engineering Chemistry Research, 2013, 52(29):9930-9939.

WANG B, ZHANG K S, ROBERT W F. Novel aeration of a large-scale flat sheet MBR:a CFD and experimental investigation[J]. AIChE Journal,2018,64(7):2721-2786.

ZHANG K S, WEI P, YAO M, et al. Effect of the bubbling regimes on the performance and energy cost of flat sheet MBRs[J]. Desalination, 2011, 283:221-226.

KAYODE F A, JUDE A O. A review of biochemical process of anaerobic digestion[J]. Advances in Bioscience and Biotechnology, 2015, 6(3):205-212.

LINDMARK J, THORIN E, BEL FDHILA R, et al. Effects of mixing on the result of anaerobic digestion:review[J]. Renewable and Sustainable Energy Reviews, 2014, 40:1030-1047.

TERASHIMA M, GOEL R, KOMATSU K, et al. CFD simulation of mixing in anaerobic digesters[J]. Bioresource Technology, 2009, 100(7):2228-2233.

WU B X. CFD simulation of mixing in egg-shaped anaerobic digesters[J]. Water Research, 2010, 44(5):1507-1519.

GRAZIA L. Study of mixing systems and geometric configurations for anaerobic digesters using CFD analysis[J]. Renewable Energy, 2018, 123:578-589.

MARTÍNEZ T M, LÓPEZ-JIMÉNEZ P A, ESCUDERO-GONZÁLEZ J, et al. Application of CFD methods to an anaerobic digester:the case of Ontinyent WWTP, Valencia, Spain[J]. Journal of Water Process Engineering, 2015, 7:131-140.

AZARGOSHASB H, MOUSAVI S M, AMANI T, et al. Three-phase CFD simulation coupled with population balance equations of anaerobic syntrophic acidogenesis and methanogenesis reactions in a continuous stirred bioreactor[J]. Journal of Industrial and Engineering Chemistry, 2015, 27:207-217.

MOHAMMAOREZAEI R, ZAREEI S, BEHROOZI-KHAZAEI N. Improving the performance of mechanical stirring in biogas plant by computational fluid dynamics (CFD) [J].CIGR Journal, 2017,19(4):91-97.

尹伟齐,曹秀芹,赵振东.桨叶安装角度对反应器内混合特性影响的模拟分析[J].北京建筑大学学报,2016,32(4):33-38.

宋金礼.发酵罐内搅拌过程的数值模拟与参数优化[D].大连:大连理工大学,2015.

王乐,樊敏,詹翔宇,等.气体搅拌下厌氧消化反应器CFD数值模拟及模型研究[J].农业机械学报,2018,49(2):305-312.

范大为. 大型储罐旋转射流搅拌器数值模拟[J]. 油气田地面工程, 2016, 35(9): 4-5.

汪正霞.计算流体力学对膜生物反应器的模拟与优化研究[D].上海:东华大学,2015.

施引文献

资源附件(0)

访问统计