异形除尘滤芯对撞脉冲喷吹清灰性能研究

吴泉泉; 孙泽文; 钟乙琪; 吴庆; 林子捷; 高康泰; 李建龙; 黄虹; 马志飞; 吴代赦

doi:10.13205/j.hjgc.202403013

异形除尘滤芯对撞脉冲喷吹清灰性能研究

doi: 10.13205/j.hjgc.202403013

南昌大学资源与环境学院, 南昌 330031

基金项目:

江西省主要学科学术和技术带头人培养计划青年人才项目(20225BCJ23027)

国家自然科学基金项目(52064037)

详细信息

作者简介:
吴泉泉(1990-),女,博士研究生,主要研究方向为大气污染控制技术。1065825275@qq.com

通讯作者:
李建龙(1988-),男,博士,副教授,主要研究方向为大气污染防治技术与装备。jlli@ncu.edu.cn

计量
- 文章访问数: 61
- HTML全文浏览量: 10
- PDF下载量: 4
- 被引次数: 0
出版历程
- 收稿日期: 2023-05-10
- 网络出版日期: 2024-05-31

DUST REMOVAL PERFORMANCE OF SPECIAL-SHAPED DUST FILTER ELEMENT BY COLLISION PULSE INJECTION

School of Resources and Environment, Nanchang University, Nanchang 330031, China

摘要

摘要: 为改善除尘滤芯脉冲喷吹清灰不良的问题,以异形滤芯为研究对象,考察了滤芯形状、喷吹角度和喷吹压差组合条件下的脉冲喷吹性能,构建脉冲喷吹的数值模型,运用Ansys Fluent软件对滤芯内部流场进行模拟及分析。结果表明:倒梯形和收缩形滤芯内对撞区的静压较大,梯形和鼓胀形滤芯内静压区较小;喷吹角度从-45°增加到45°,直筒形和收缩形滤芯的喷吹压力和喷吹性能整体表现为先增后降的趋势,最佳喷吹角度为30°;增大喷吹压差PR有助于提高滤芯的喷吹性能,并且压差对于收缩形滤芯喷吹性能的提升要强于直筒形滤芯。总体上,除尘滤芯的收缩形结构有利于提高对撞脉喷清灰性能。
- 异形滤芯 /
- 滤芯形状 /
- 喷吹角度 /
- 脉冲喷吹性能 /
- 数值模拟
Abstract: To improve the problem of poor pulse cleaning of the filter element, this paper took the special-shaped filter element as the research object, and the pulse injection performance under the combination of filter element shape, nozzle angle, and injection pressure difference was investigated, also the numerical model of pulse injection was built. The flow field inside the filter element was simulated and analyzed by Ansys Fluent software. The results showed that the static pressure in the collision zone of the inverted trapezoid and contractile filter was larger, while that in the trapezoid and bulging filter was smaller. When the nozzle angle increased from -45° to 45°, the injection pressure and performance of the straight cylinder and shrink filter element increased first and then decreased, and the optimal nozzle angle was 30°. Increasing the injection pressure difference PR helped improve the injection performance of the filter element, and the pressure difference had a stronger effect on the injection performance of the shrink filter element than that of the straight cylinder filter element. Generally, the shrinkage structure of the dust filter element is beneficial to improve the cleaning performance of the pulse injection.
- special-shaped filter element /
- filter element shape /
- nozzle angle /
- pulse injection performance /
- numerical simulation

HTML全文

参考文献(26)

[1]	YUAN Z, KHAKZAD N, KHAN F, et al. Dust explosions:a threat to the process industries[J]. Process Safety and Environmental Protection, 2015,98:57-71.
[2]	ZHANG M X, QIN W Q, MA X H, et al. An environmentally friendly technology of metal fiber bag filter to purify dust-laden airflow[J]. Atmosphere, 2022,13(3):485.
[3]	XING Y, YU H, LU P, et al. Experimental research on purifying ultrafine nanoparticle by SBA-15 and its filtration mechanism[J]. Powder Technology, 2017,330:32-39.
[4]	POPE C A, DOCKERY D W. Health effects of fine particulate air pollution:lines that connect[J]. Journal of the Air & Waste Management Association, 2006,56(6):709-742.
[5]	乐有邦, 张发涛, 胡维西, 等. 中美两国粉尘爆炸风险评估对比研究与分析[J]. 工业安全与环保, 2020,46(11):60-62.
[6]	张建平, 陈思艺, 王帅, 等. 扩散荷电对两种ESP除尘性能影响的对比分析[J].环境工程, 2019, 37(8):143-147.
[7]	李海英,董格伦,张军亚,等.基于湿式除尘的扬尘抑制技术研究进展[J].节能,2022,41(2):77-80.
[8]	钟永会.发尘角度对旋风除尘效率影响的实验研究[J].科学技术创新,2023(10):52-55.
[9]	于伟静. 燃煤电厂烟尘超低排放技术研究现状及发展[J]. 化工进展, 2017,36(增刊1):428-435.
[10]	姚群, 宋七棣, 陈志炜. 2020年袋式除尘行业发展评述和展望[J]. 中国环保产业, 2021(3):19-22.
[11]	LI J S, WU Q Q, HUANG Y Y, et al. Particulate matters filtration by a filter medium with pin holes:modeling and experimental verification[J]. Process Safety and Environmental Protection, 2022,158:282-290.
[12]	张殿印,王纯. 脉冲袋式除尘器手册[M]. 北京:化学工业出版社, 2011.
[13]	李建龙, 王安琪, 范博, 等. 除尘器脉喷清灰影响阶段的粉尘分级排放特征[J]. 安全与环境学报, 2018,18(1):315-319.
[14]	艾子昂,吴泉泉,孙燕,等.气流隔板改善滤筒脉喷清灰性能的数值模拟[J].南昌大学学报(工科版),2021,43(4):384-391.
[15]	YAN C P, LIU G J, CHEN H Y. Effect of induced airflow on the surface static pressure of pleated fabric filter cartridges during pulse jet cleaning[J]. Powder Technology, 2013,249:424-430.
[16]	李建龙, 陈源正, 林子捷, 等. 除尘滤筒脉喷清灰技术研究进展与展望[J]. 金属矿山, 2022(11):23-35.
[17]	郗元, 赵赫民, 代岩.滤筒结构对除尘器性能影响的CFD研究[J].机械设计与制造,2018,332(10):233-235 ,239.
[18]	魏民, 钱付平, 何东洋, 等. 除尘器新形褶式滤筒的结构优化及系列化设计[J]. 安徽工业大学学报(自然科学版), 2020,37(2):172-179.
[19]	陈强, 林子捷, 李建龙, 等. 扩散喷嘴改善金锥滤筒脉喷清灰性能的数值模拟[J]. 环境工程学报, 2021,15(5):1634-1644.
[20]	LIN Z J, LI J L, CHEN D R, et al. Improved performance of the opposing pulsed-jet cleaning by annular-slit nozzles for pleated filter cartridges[J]. Separation and Purification Technology, 2022,303:122233.
[21]	刘东,余洪浪,王令,等.上部开口散射器提高脉冲喷吹清灰性能实验[J].环境工程,2019,37(8):138-142.
[22]	LI J L, WANG P, WU D S, et al. Numerical study of opposing pulsed-jet cleaning for pleated filter cartridges[J]. Separation and Purification Technology, 2020,234:116086.
[23]	LI J L, WU D S, WU Q Q, et al. Design and performance evaluation of novel colliding pulse jet for dust filter cleaning[J]. Separation and Purification Technology, 2019,213:101-113.
[24]	WU Q Q, LI J L, WU D R, et al. Effects of the overall length and OD on opposing-pulse-jet cleaning for pleated filter cartridges[J]. Aerosol and Air Quality Research, 2020,20(3):432-443.
[25]	李建龙, 林子捷, 陈源正, 等.文丘里喷嘴改进除尘滤筒对撞脉喷清灰性能的数值模拟[J].安全与环境学报,2022,22(3):1558-1565.
[26]	李建龙, 赵艺, 孙泽文, 等. 环形缝隙喷嘴改进导流内锥式除尘滤筒脉冲喷吹性能的数值模拟[J].南昌大学学报(工科版),2023,45(1):1-4.