THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXING
PHARMACEUTICAL WASTEWATER

Ouyang ERming Kuang Bin Wang Na

doi:10.13205/j.hjgc.201501008

Volume 33 Issue 1

Mar. 2015

Turn off MathJax

Article Contents

Article Navigation > ENVIRONMENTAL ENGINEERING > 2015 > 33(1): 32-36

Ouyang ERming Kuang Bin Wang Na, . THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXINGPHARMACEUTICAL WASTEWATER[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(1): 32-36. doi: 10.13205/j.hjgc.201501008

Citation:

Ouyang ERming Kuang Bin Wang Na, . THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXING PHARMACEUTICAL WASTEWATER[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(1): 32-36. doi: 10.13205/j.hjgc.201501008

Ouyang ERming Kuang Bin Wang Na, . THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXINGPHARMACEUTICAL WASTEWATER[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(1): 32-36. doi: 10.13205/j.hjgc.201501008

Citation:

Ouyang ERming Kuang Bin Wang Na, . THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXING PHARMACEUTICAL WASTEWATER[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(1): 32-36. doi: 10.13205/j.hjgc.201501008

PDF( 0 KB)

THE ENGINEERING APPLICATION OF BIOFOR TREATING MIXING PHARMACEUTICAL WASTEWATER

doi: 10.13205/j.hjgc.201501008

Ouyang ERming Kuang Bin Wang Na,

Publish Date: 2015-01-22

Abstract

Abstract

BIOFOr was applied to treat the mixing pharmaceutical wastewater． BIOFOr reactor started up quickly with the mode of combination of natural hanging and vaccination hanging，and had a good performance，high resistance to impact load capacity，stable running． The average removal rate of COD and NH3 － N reached 72. 45% and 56. 8% respectively． The effluent indexes of BIOFOr could completely meet the Discharge Standard of Water Pollutants for Pharmaceutical Industry Mixing /Compounding and Formulation Category ( GB 21908 2008) ． The optimum gas-water ratio of BIOFOr was 5 ∶ 1． Combined air-water backwash mode was taken in BIOFOr．
- mixing pharmaceutical wastewater,
- A/O,
- start up,
- denitrification