APPLICATION OF CFD IN A DOUBLE STAGE DESULFURIZATION SYSTEM

NIE Peng-fei; GAO Zhi; MENG De-run; ZHANG Hong-bo; ZHANG Qing

doi:10.13205/j.hjgc.202108016

Volume 39 Issue 8

Jan. 2022

Turn off MathJax

Article Contents

Article Navigation > ENVIRONMENTAL ENGINEERING > 2021 > 39(8): 119-124,130

NIE Peng-fei, GAO Zhi, MENG De-run, ZHANG Hong-bo, ZHANG Qing. APPLICATION OF CFD IN A DOUBLE STAGE DESULFURIZATION SYSTEM[J]. ENVIRONMENTAL ENGINEERING , 2021, 39(8): 119-124,130. doi: 10.13205/j.hjgc.202108016

Citation:

NIE Peng-fei, GAO Zhi, MENG De-run, ZHANG Hong-bo, ZHANG Qing. APPLICATION OF CFD IN A DOUBLE STAGE DESULFURIZATION SYSTEM[J]. ENVIRONMENTAL ENGINEERING , 2021, 39(8): 119-124,130. doi: 10.13205/j.hjgc.202108016

Citation:

PDF( 5664 KB)

APPLICATION OF CFD IN A DOUBLE STAGE DESULFURIZATION SYSTEM

doi: 10.13205/j.hjgc.202108016

1. Hebei Datang International Wangtan Power Generation Co., Ltd, Tangshan 063611, China;
2. Tangshan University, Tangshan 063020, China;
3. FORCE Technology(Beijing) Co., Ltd, Beijing 100020, China

Received Date: 2020-12-28
Available Online: 2022-01-18

Abstract

Abstract

In order to accurately obtain the gas-liquid two-phase reaction characteristics of the two-stage series tower desulfurization system, the gas-liquid two-phase flow and heat transfer process in the spray section of the double tower series wet desulfurization tower in a power plant were numerically simulated by using the step-by-step method and the self-developed tray model. A new system evaluation index was used to evaluate the desulfurization system, and the desulfurization system was optimized and evaluated by numerical simulation. The calculation results showed that no matter the pre washing tower or the absorption tower, the design of adding tray and efficiency ring reasonably could obtain better performance on the basis of opening less spray layer, which was conducive to reaching the higher standard of desulfurization, and reducing the amount of circulating slurry as well as reducing the pressure drop of the whole system of desulfurization tower and the power consumption.
- flue gas desulfurization,
- numerical simulation,
- tray model,
- optimization design of desulfurization tower

FullText(HTML)

References(9)

References

[1]	林瑜,陈德珍,尹丽洁.喷淋层组合方式对大型脱硫塔内流动和热湿交换过程影响的数值模拟[J].中南大学学报(自然科学版),2017,48(10):2572-2581.
[2]	钟毅,高翔,王惠挺,等.基于CFD技术的湿法烟气脱硫系统性能优化[J].中国电机工程学报,2008,28(32):18-23.
[3]	MAROCCO L,INZOLI F.Multiphase Euler-Lagrange CFD simulation applied to wet flue gas desulphurisation technology[J].International Journal of Multiphase Flow,2009,35(2):185-194.
[4]	ZHENG M Q,HU H,ZHANG G X,et al.Combination of adsorption-diffusion model with CFD for study of desulfurization in fixed bed[J].Journal of Environmental Chemical Engineering,2017,5(4):4141-4150.
[5]	吴一帆,王宏利,秦明臣,等.托盘式湿法烟气脱硫塔阻力特性研究[J].中国煤炭,2020,46(4):70-76.
[6]	HOFELSAUER J,NOTTER W,MAROCCO L,et al.Improvement of SO₂ removal with application of wall rings and advanced CFD modeling:the case of FGD unit Megalopolis[J].VGB Power Technology,2008,3:85-89.
[7]	郭健.任丘电厂湿法脱硫双塔串联系统改造研究及应用[D].保定:华北电力大学(保定),2018.
[8]	林瑜,陈德珍.大型脱硫塔喷淋段气液两相流动与传热的数值仿真及验证[J].燃烧科学与技术,2016,22(1):5-12.
[9]	TSENG C C,LI C J.Eulerian-Eulerian numerical simulation for a flue gas desulfurization tower with perforated sieve trays[J].International Journal of Heat and Mass Transfer,2018,116:329-345.