VERIFICATION METHOD OF THE PERMITTED EMISSIONS OF PRINTING AND DYEING ENTERPRISES BASED ON ADVANCED TECHNOLOGIES: A CASE STUDY OF THE TAIHU LAKE BASIN

TIAN Tao; GAO Hailong; ZHANG Bingjie

doi:10.13205/j.hjgc.202210024

Volume 40 Issue 10

Oct. 2022

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > ENVIRONMENTAL ENGINEERING > 2022 > 40(10): 176-182,191

TIAN Tao, GAO Hailong, ZHANG Bingjie. VERIFICATION METHOD OF THE PERMITTED EMISSIONS OF PRINTING AND DYEING ENTERPRISES BASED ON ADVANCED TECHNOLOGIES: A CASE STUDY OF THE TAIHU LAKE BASIN[J]. ENVIRONMENTAL ENGINEERING , 2022, 40(10): 176-182,191. doi: 10.13205/j.hjgc.202210024

Citation:

TIAN Tao, GAO Hailong, ZHANG Bingjie. VERIFICATION METHOD OF THE PERMITTED EMISSIONS OF PRINTING AND DYEING ENTERPRISES BASED ON ADVANCED TECHNOLOGIES: A CASE STUDY OF THE TAIHU LAKE BASIN[J]. ENVIRONMENTAL ENGINEERING , 2022, 40(10): 176-182,191. doi: 10.13205/j.hjgc.202210024

Citation:

TIAN Tao, GAO Hailong, ZHANG Bingjie. VERIFICATION METHOD OF THE PERMITTED EMISSIONS OF PRINTING AND DYEING ENTERPRISES BASED ON ADVANCED TECHNOLOGIES: A CASE STUDY OF THE TAIHU LAKE BASIN[J]. ENVIRONMENTAL ENGINEERING , 2022, 40(10): 176-182,191. doi: 10.13205/j.hjgc.202210024

PDF( 1393 KB)

VERIFICATION METHOD OF THE PERMITTED EMISSIONS OF PRINTING AND DYEING ENTERPRISES BASED ON ADVANCED TECHNOLOGIES: A CASE STUDY OF THE TAIHU LAKE BASIN

doi: 10.13205/j.hjgc.202210024

Jiangsu Provincial Ecological Assessment Center, Nanjing 210036, China

Received Date: 2021-12-13

Abstract

Abstract

In response to the special requirements for water environment quality improvement in the Taihu Lake Basin, this article focused on the printing and dyeing industry in the Taihu Lake Basin, and built an enterprise advanced in production technology and equipment, resource and energy utilization, pollutant generation, economic benefits, process equipment, treatment effects, and management level. The evaluation index system for performance, and printing and dyeing products were refined into 4 categories from 5 categories in the Water Pollutant Discharge Standard for Textile Dyeing and Finishing Industry (GB 4287-2012). The study found that the pollutants discharge load limit per unit product calculated and strictly obtained using four methods including enterprise monitoring data, industry standards, environmental statistics and pollutant discharge permit declaration data was far lower than the current national emission limit. On this basis, a complete technical plan was formed, which could provide a basis for the determination of pollution permit limits for this industry and other industries based on advanced technologies, and provide technical support for the implementation of the pollution permit system.
- printing and dyeing enterprises,
- permitted emissions,
- Taihu Lake basin,
- pollutant,
- advanced enterprise

FullText(HTML)

References(17)

References

[1]	贾雪梅, 周杜牧, 杨竞宪. "一证式"管理推进企业污染防治:以纺织印染行业排污许可证管理为例[J]. 环境影响评价,2019,41(2):24-27.
[2]	韩冬梅. 中国水排污许可证制度设计研究[M]. 北京:人民出版社, 2015:143-180.
[3]	宋国君, 张震. 美国工业点源水污染物排放标准体系及启示[J]. 环境污染与防治,2014,36(1):97-101.
[4]	谢伟. 美国国家污染物排放消除系统许可证管理制度及其对我国排污许可证管理的启示[J]. 科技管理研究,2019,39(3):238-245.
[5]	林业星, 沙克昌, 王静,等. 国外排污许可制度实践经验与启示[J]. 三峡环境与生态,2020,42(1):14-18.
[6]	邓义祥, 郝晨林, 李子成. 基于技术和水质相结合的排污许可限值核定技术研究[J]. 环境科学研究,2020,33(11):2515-2522.
[7]	孙荪. 我国实施规划环境影响评价的有效性研究[D]. 上海:同济大学, 2008:9-50.
[8]	苑文凯, 赵东风, 崔积山, 等. 石化行业排污许可有效性评估指标体系构建[J]. 三峡环境与生态,2019, 41(5):28-32.
[9]	TUFEKCI N, SIVRI N, TOROZ I. Pollutants of textile industry wastewater and assessment of its discharge limits by water quality standards[J].Turkish Journal of Fisheries and Aquatic Sciences,2007,7(2):97-103.
[10]	李嘉, 于鲁冀, 曾科, 等. 基于农副食品加工行业生产特性的排放限值核定方法研究[J]. 环境科学学报,40(5):1902-1910.
[11]	李海兵, 王绍伟, 邰阳. 现行环境标准执行中存在的问题及建议[J]. 环境与发展,2019, 31(3):7-10.
[12]	张徐洁, 万梅, 王晨光, 等. 原料材质,产品类型及生产工序对印染废水产生特性的影响研究[J]. 环境科学学报,2020,40(11):381-390.
[13]	佟欧. 印染行业节水减排清洁生产指标体系的构建及最佳可行技术研究[D]. 大连:大连理工大学, 2011:15-76.
[14]	WANG J, LONG M C, ZHANG Z J, et al.Removal of organic compounds during treating printing and dyeing wastewater of different process units[J].Chemosphere,2008,71(1):195-202.
[15]	张国徽. 印染废水的来源和特征分析[C]//中国环境科学学会.2006年学术年会优秀论文集(中卷):中国环境科学学会.中国环境科学出版社,2006:1001-1005.
[16]	张倩. 论几何平均数在社会经济中的应用[J]. 旅游纵览, 2012(16):134-136.
[17]	华婷, 郭海华, 尹志红. 几何平均数在综合指数中的应用[J]. 科技进步与对策,2003,20(5):97-98.

Relative Articles

[1]	HAO Jingyu, CHEN Shuxian, CHEN Xiang, WANG Xiankai, WANG Hang, HUA Yu, DAI Xiaohu. APPLICATION AND PROSPECTS OF PYROLYSIS CARBONIZATION TECHNOLOGY IN SLUDGE TREATMENT[J]. ENVIRONMENTAL ENGINEERING , 2024, 42(9): 261-275. doi: 10.13205/j.hjgc.202409026
[2]	WU Bin, ZHANG Ming, LI Yiping, WANG Haiying, ZHOU Yuxuan, ZHENG Ke, ZHAO Sisuo, CHEN Huangjun. DISCHARGE LAW OF DOMESTIC WASTEWATER AND POLLUTANTS DISCHARGE OF URBAN RESIDENTS IN SOUTH CHINA[J]. ENVIRONMENTAL ENGINEERING , 2022, 40(12): 196-201,280. doi: 10.13205/j.hjgc.202212026
[3]	BAI Ying-jie, ZENG Ke, GAO Jing-qing, WANG Yan-peng, LI Jia, WANG Lan-qi. A COMPARATIVE STUDY ON ASSESSMENT TECHNOLOGY OF POLLUTANTS DISCHARGE PERMIT LIMITS BETWEEN CHINA AND THE UNITED STATES[J]. ENVIRONMENTAL ENGINEERING , 2021, 39(2): 16-20,26. doi: 10.13205/j.hjgc.202102003
[4]	QIN Yan, XING Yi, ZHANG Li-guo, HONG Chen, HU Jia-shuo, LI Zai-xing, FENG Li-hui, ZHANG Ze, ZHAO Hong-jun, MENG Jie. RESEARCH PROGRESS ON RESIDUAL SLUDGE DEPTH DRYING[J]. ENVIRONMENTAL ENGINEERING , 2020, 38(3): 154-161. doi: 10.13205/j.hjgc.202003026
[5]	ZHANG Ya-ru, CHEN Yong-jin, GUO Qing-chun, SUN Hao. ANALYSIS ON TEMPO-SPATIAL VARIATION AND PREDICTION OF AIR POLLUTANTS IN JINAN[J]. ENVIRONMENTAL ENGINEERING , 2020, 38(2): 114-121. doi: 10.13205/j.hjgc.202002016
[12]	You Kun Wang Di Fu Jinxiang Cao Sipeng, . BUILDING OF MONITORING INDEX SYSTEM OF POLLUTION SOURCES IN PUHE BASIN[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(3): 122-125. doi: 10.13205/j.hjgc.201503025
[13]	Sun Minhua, Jiang Cuiling, Zhang Peng, Jiang Muxian, Qiu Weijian, Huang Xiaofeng. ECOLOGICAL RISK ASSESSMENT OF HEAVY METALS IN SEDIMENTS IN LIANGTANG RIVER OF TAIHU BASIN[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(8): 118-122. doi: 10.13205/j.hjgc.201508027
[14]	Wang Houcheng Zheng Zengzhong Zhang Hefei Nan Zhongren, . STUDY ON VARIATION OF HEAVY METALS SPECIATION IN SLUDGE STABILIZATION PROCESS[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(10): 81-84. doi: 10.13205/j.hjgc.201510018
[15]	Lei Xiaoling Peng Xiaolan Huang Yuanyuan Yang Bailu, . RESEARCH ON THE EFFECTS OF GRAB DREDGING EQUIPMENT ON SEDIMENT POLLUTANT RELEASE REGULARITY[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(4): 97-99. doi: 10.13205/j.hjgc.201504020
[16]	Zhang Youlong, Yang Ping, Xue Shoubao. RESEARCHING ADVANCES IN TRANSPORTATION OF NANOMATERIAL CONTAMINANTS IN SOIL[J]. ENVIRONMENTAL ENGINEERING , 2015, 33(3): 88-91. doi: 10.13205/j.hjgc.201503018

Supplements(0)

Cited By

Cited by

Periodical cited type(2)

1.	徐云龙，李向东. PCB生产废水处理工程实例. 工业用水与废水. 2024(04): 82-86 .
2.	李雪萍，王晓慧，吴鹏，姜蓉蓉，张婷婷，白贞智，柴西龙. 基于不同减排情景的印染行业许可排放量核定方法探究——以江苏南通市为例. 环境工程技术学报. 2023(06): 2289-2298 .

Other cited types(0)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views (118) PDF downloads(1)