Environmental technology verification for an improved medical waste high-temperature treatment technology

CAO Yunxiao; LIN Li; ZHAO Yan; YU Xiaodong; WANG Lixue; GAO Qiang

doi:10.13205/j.hjgc.202510021

Volume 43 Issue 10

Oct. 2025

Turn off MathJax

Article Contents

Article Navigation > ENVIRONMENTAL ENGINEERING > 2025 > 43(10): 194-202

CAO Yunxiao, LIN Li, ZHAO Yan, YU Xiaodong, WANG Lixue, GAO Qiang. Environmental technology verification for an improved medical waste high-temperature treatment technology[J]. ENVIRONMENTAL ENGINEERING , 2025, 43(10): 194-202. doi: 10.13205/j.hjgc.202510021

Citation:

CAO Yunxiao, LIN Li, ZHAO Yan, YU Xiaodong, WANG Lixue, GAO Qiang. Environmental technology verification for an improved medical waste high-temperature treatment technology[J]. ENVIRONMENTAL ENGINEERING , 2025, 43(10): 194-202. doi: 10.13205/j.hjgc.202510021

Citation:

CAO Yunxiao, LIN Li, ZHAO Yan, YU Xiaodong, WANG Lixue, GAO Qiang. Environmental technology verification for an improved medical waste high-temperature treatment technology[J]. ENVIRONMENTAL ENGINEERING , 2025, 43(10): 194-202. doi: 10.13205/j.hjgc.202510021

PDF( 750 KB)

Environmental technology verification for an improved medical waste high-temperature treatment technology

doi: 10.13205/j.hjgc.202510021

1. Chinese Society for Environmental Sciences, Beijing 100082, China;
2. Yike Environmental Protection Technology Co., Ltd., Wenzhou 325099, China;
3. Shenyang Institute of Engineering, Shenyang 110136, China;
4. Shenyang Xinji Environmental Protection Technology Research Institute Co., Ltd., Shenyang 110168, China

Received Date: 2024-04-09
Accepted Date: 2024-06-11
Rev Recd Date: 2024-05-20

Available Online: 2025-12-03

Publish Date: 2025-10-01

Abstract

Abstract

Medical waste is extremely harmful to the environment and human health， especially under an epidemic situation. The safe disposal of a large amount of medical waste has long been a serious environmental challenge globally. In 2020， strengthening the weakness of the collection and disposal of medical waste was proposed by China， which posted higher requirements for the progress of medical waste treatment and disposal technology， the improvement of pollution control level， the strengthening of facility operation capacity， and the improvement of the management system. The safe and effective treatment and disposal of medical waste is the direct means to prevent the risk of medical waste. The medical waste treatment and disposal technologies keep developing in China. Various new technologies have been applied in different areas， and most of them have been evaluated by Environmental Technology Verification （ETV）. A set of mature verification and evaluation methods and models have been developed for disinfection technologies. However， there is only one ETV case for the new high-temperature treatment technology of medical waste. This paper performed a case study of the pyrolysis technology of medical waste. Based on the summary of the existing ETV requirements， the technical process was analyzed. The environmental indexes， technical indexes， as well as the operation-maintenance indexes， were all clarified. According to the innovation characteristics of the technology， the innovation indexes of energy saving， carbon reduction， pollution reduction， and resource utilization were established. Thus， the whole ETV index system and test plan were accomplished. This paper can provide a reference for performing ETV for the new high-temperature treatment technologies.
- environmental technology verification（ETV）,
- medical waste,
- high temperature treatment,
- technological innovation,
- evaluation index

FullText(HTML)

References(21)

References

[1]	ZUO P L，GAO Q，ZHANG Y，et al. Research on verification for air pollutants ultra-low emission technologies of coal-fired power plants［J］. Environmental Engineering，2022，40（12）:224-230. 左朋莱，高强，张芸，等. 燃煤电厂大气污染物超低排放技术验证评价［J］. 环境工程，2022，40（12）:224-230.
[2]	ZHAO Y M. Construction and implementation of national environmental technology management system［J］. Environment Protection，2007（8）:4-7. 赵英民. 国家环境技术管理体系的构建与实施［J］. 环境保护，2007（8）:4-7.
[3]	LIU P，WANG R，HAN J H，et al. Analysis on the evaluation system of environmental technology verification（ETV）in China［J］. Environmental Protection Science，2014，40（2）:86-89. 刘平，王睿，韩佳慧，等. 我国环境保护技术验证评价制度建设探析［J］. 环境保护科学，2014，40（2）:86-89.
[4]	State Council of the PRC. Law of the PRC on Promoting the Transformation of Scientific and Technological Achievements［EB/OL］.［ 2015-08-30］. https://www.gov.cn/xinwen/2015-08/30/content_2922111.htm. 中华人民共和国国务院. 关于印发实施《中华人民共和国促进科技成果转化法》若干规定的通知［EB/OL］.［ 2015-08-30］. https://www.gov.cn/xinwen/2015-08/30/content_2922111.htm.
[5]	State Council of the PRC. Action plan for promoting the transfer and transformation of scientific and technological achievements［EB/OL］.［ 2016-05-09］. http://www.gov.cn/zhengce/content/2016-05/09/content_5071536.htm. 中华人民共和国国务院办公厅. 关于印发促进科技成果转移转化行动方案的通知［EB/OL］.［ 2016-05-09］. http://www.gov.cn/zhengce/content/2016-05/09/content_5071536.htm.
[6]	State Council of the PRC. Construction plan for national technology transfer system［EB/OL］.［ 2017-09-15］. http://www.gov.cn/gongbao/content/2017/content_5230265.htm. 中华人民共和国国务院. 关于印发国家技术转移体系建设方案的通知［EB/OL］.［ 2017-09-15］. http://www.gov.cn/gongbao/content/2017/content_5230265.htm.
[7]	Ministry of Ecology and Environment of the PRC. Guiding opinions on promoting the transformation of scientific and technological achievements in ecological environment［EB/OL］.［ 2018-11-23］. http://www.china-epc.cn/zxgz/tzgg/201901/t20190130_691544.shtml？eqid=df0383180000d4c600000002642a74b6. 生态环境部. 关于促进生态环境科技成果转化的指导意见［EB/OL］.［ 2018-11-23］. http://www.china-epc.cn/zxgz/tzgg/201901/t20190130_691544.shtml？eqid=df0383180000d4c600000002642a74b6.
[8]	CHEN Y，FENG Q Z，LIU L Y，et al. Current status and development of environmental technology verification in China［J］. Environmental Protection Science，2021，47（3）:7-12. 陈扬，冯钦忠，刘俐媛，等. 中国环境技术验证评价现状及发展［J］. 环境保护科学，2021，47（3）:7-12.
[9]	FENG Q Z，CHEN Y，LIU L Y，et al. Application case study on high temperature dry heat technology for medical waste treatment［J］// Environmental Engineering，2017:6. 冯钦忠，陈扬，刘俐媛，等. 医疗废物高温干热处理技术应用案例研究［J］. 环境工程，2017，35（增刊2）:6.
[10]	Ministry of Ecology and Environment of the PRC. Announcement on the release of three solid waste pollution control standards，including the Standard for Pollution Control on the Non-Hazardous Industrial Solid Waste Storage and Landfill［EB/OL］.［ 2021-03-05］. http://www.mee.gov.cn/xxgk2018/xxgk/xxgk01/202012/t20201218_813925.html. 生态环境部. 关于发布《一般工业固体废物贮存和填埋污染控制标准》等三项固体废物污染控制标准的公告（公告 2020年第65号）［EB/OL］.［ 2021-03-05］. http://www.mee.gov.cn/xxgk2018/xxgk/xxgk01/202012/t20201218_813925.html.
[11]	CAO Y X，CHEN W X，YU X D，et al. Application of environmental technology verification in disinfection treatment on medical waste—a case study of a frictional heat treatment［J］. Chinese Journal of Environmental Engineering，2021，15（9）:2985-2995. 曹云霄，陈伟星，于晓东，等. 环境技术验证在医疗废物消毒处理领域的应用:以摩擦热处理技术为例［J］. 环境工程学报，2021，15（9）:2985-2995.
[12]	YU X D，CAO Y X，LI H，et al. Study on steam disinfection technology based on dynamic rotation for medical waste［J］. Environmental Protection Science，2021，47（3）:30-33. 于晓东，曹云霄，李辉，等. 基于动态旋转作用的医疗废物高温蒸汽消毒处理技术研究［J］. 环境保护科学，2021，47（3）:30-33.
[13]	CAO Y X，YU X D，YUE J N，et al. Development and innovation of medical waste treatment and disposal technology in China［J］. China Environmental Protection Industry，2024（1）:46-53. 曹云霄，于晓东，岳佳妮，等. 我国医疗废物处理处置技术发展与创新［J］. 中国环保产业，2024（1）:46-53.
[14]	CAO Y X，YU X D，SHAN S J，et al. Pollution prevention policy on medical waste treatment and disposal in China:evolution，problem analysis and suggestions［J］. Chinese Journal of Environmental Engineering，2021，15（2）:389-400. 曹云霄，于晓东，单淑娟，等. 我国医疗废物处理处置污染防治政策演进、存在问题分析及建议［J］. 环境工程学报，2021，15（2）:389-400.
[15]	CAO Y X，CHEN W X，YU X D，et al. Design of environmental technology verification for novel medical waste disinfection technology—a case study of a friction heat treatment technology［J］. Environmental Protection Science，2021，47（3）:24-29. 曹云霄，陈伟星，于晓东，等. 新兴医疗废物消毒处理技术环境技术验证评价方案设计:以摩擦热处理技术为例［J］. 环境保护科学，2021，47（3）:24-29.
[16]	HUANG H Y，LI Z F，XU L J，et al. Comprehensive assessment of the technological，environmental，and economic effects of pilot-scale oil refining by low-temperature pyrolysis of waste tires［J/OL］. China Environmental Science，1-9［ 2024-03-20］. https://doi.org/10.19674/j.cnki.issn1000-6923.20240306.001. 黄海延，李子锋，徐刘杰，等. 废旧轮胎低温裂解炼油中试工艺技术、环境及经济效益综合评估［J/OL］. 中国环境科学，1-9［ 2024-03-20］. https://doi.org/10.19674/j.cnki.issn1000-6923.20240306.001.
[17]	JIAO J Q，YUAN B G，CHENG Q B，et al. Research on pyrolysis of waste plastics and dechlorination technology［J］. Liaoning Chemical Industry，2023，52（8）:1214-1216. 焦俊卿，袁本高，程全彪，等. 废塑料裂解油化与脱氯技术的研究［J］. 辽宁化工，2023，52（8）:1214-1216.
[18]	YI Y M，NING P，QU G F，et al. Low-temperature pyrolysis process for oil production from sewage sludge［J］. Journal of Kunming University of Science and Technology（Science and Technology），2008（3）:92-95. 易玉敏，宁平，瞿广飞，等. 剩余活性污泥低温裂解制油研究［J］. 昆明理工大学学报（理工版），2008（3）:92-95.
[19]	LU X B，YANG S R，YANG J. Pyrolysis fuel technology using domestic organic waste［J］. Chemical Engineering Design Communications，2019，45（8）:93-94. 路小彬，杨书荣，杨军. 生活有机垃圾裂解燃油技术［J］. 化工设计通讯，2019，45（8）:93-94.
[20]	Chinese Society for Environmental Sciences. Announcement on the release of two standards:General Specification for Environmental Protection Technology Verification and Evaluation（Trial）and General Specification for Environmental Protection Technology Verification and Evaluation and Test（Trial）［EB/OL］.［ 2021-03-05］. http://www.chinacses.org/zxpj/jsyz/gzdt_153/201509/t20150908_633895.shtml. 中国环境科学学会. 关于发布《环境保护技术验证评价通用规范（试行）》《环境保护技术验证评价测试通用规范（试行）》等两项标准的公告［EB/OL］.［ 2021-03-05］. http://www.chinacses.org/zxpj/jsyz/gzdt_153/201509/t20150908_633895.shtml.
[21]	CHEN G YU X D，YUE J N，et al. Interpretation of standard for pollution control on medical waste treatment and disposal［J］. Environmental Protection Science，2021，47（3）:1-6. 陈刚，于晓东，岳佳妮，等. 医疗废物处理处置污染控制标准解读［J］. 环境保护科学，2021，47（3）:1-6.