A REVIEW OF COATING ORGANIC SOLID WASTE TREATMENT & DISPOSAL IN MACHINERY MANUFACTURING INDUSTRY

HE Qian; HUANG Sheng-xiong; LUO Wei; FAN Zhong-yi; HU Qing; ZHOU Nan; XIA Mao; ZHOU Zhi

doi:10.13205/j.hjgc.202011024

Volume 38 Issue 11

Apr. 2021

Turn off MathJax

Article Contents

Article Navigation > ENVIRONMENTAL ENGINEERING > 2020 > 38(11): 145-151

HE Qian, HUANG Sheng-xiong, LUO Wei, FAN Zhong-yi, HU Qing, ZHOU Nan, XIA Mao, ZHOU Zhi. A REVIEW OF COATING ORGANIC SOLID WASTE TREATMENT & DISPOSAL IN MACHINERY MANUFACTURING INDUSTRY[J]. ENVIRONMENTAL ENGINEERING , 2020, 38(11): 145-151. doi: 10.13205/j.hjgc.202011024

Citation:

HE Qian, HUANG Sheng-xiong, LUO Wei, FAN Zhong-yi, HU Qing, ZHOU Nan, XIA Mao, ZHOU Zhi. A REVIEW OF COATING ORGANIC SOLID WASTE TREATMENT & DISPOSAL IN MACHINERY MANUFACTURING INDUSTRY[J]. ENVIRONMENTAL ENGINEERING , 2020, 38(11): 145-151. doi: 10.13205/j.hjgc.202011024

Citation:

HE Qian, HUANG Sheng-xiong, LUO Wei, FAN Zhong-yi, HU Qing, ZHOU Nan, XIA Mao, ZHOU Zhi. A REVIEW OF COATING ORGANIC SOLID WASTE TREATMENT & DISPOSAL IN MACHINERY MANUFACTURING INDUSTRY[J]. ENVIRONMENTAL ENGINEERING , 2020, 38(11): 145-151. doi: 10.13205/j.hjgc.202011024

PDF( 1590 KB)

A REVIEW OF COATING ORGANIC SOLID WASTE TREATMENT & DISPOSAL IN MACHINERY MANUFACTURING INDUSTRY

doi: 10.13205/j.hjgc.202011024

HE Qian¹,
HUANG Sheng-xiong¹,
LUO Wei²,
FAN Zhong-yi¹,
HU Qing¹,
ZHOU Nan^1,3,4,
XIA Mao¹,
ZHOU Zhi^{1,3,4,5
,
,}

1. School of Chemistry and Materials Science, Hunan Agricultural University, Changsha 410128, China;
2. Powder Metallurgy Research Institute, Central South University, Changsha 410083, China;
3. Hunan Biochar Engineering Research Center, Changsha 410128, China;
4. Hunan Optical Agriculture Engineering Technology Research Center, Changsha 410128, China;
5. Hunan Kegu Environmental Protection Technology Co., Ltd, Changsha 410013, China

Received Date: 2019-11-28
Available Online: 2021-04-23
Publish Date: 2021-04-23

Abstract

Abstract

The machinery manufacturing industry was a pillar industry in China. Especially in the 21st century, machinery manufacturing industry developed rapidly. However, due to the large amount of wastewater, exhaust gas, solid waste and additional pollutants generated during the coating process of machinery equipment in machinery manufacturing, the treatment of manufacturing pollutants had always been the focus of the industry’s environmental governance. This article mainly introduced the solid waste treatment technology and its research progress during the coating process in machinery manufacturing industry. Finally, we believed that the utilization and the harmless treatment of organic solid wastes in coating porcess were the focus of future researches. Only the development model of circular economy could effectively alleviate the pressure on China ’s resource shortage and environmental pollution, and thus ensure the smooth realization of the overall goal of sustainable development.
- mechanical manufacturing,
- coating organic solid waste,
- circular economy,
- environmental management

FullText(HTML)

References(55)

References

刘昊. 机械制造行业运行状况及投资机会[J]. 中国国情国力,2019(9):20-25.

贺迅. 基于清洁生产的涂料污染治理及丙烯酸酯光固化涂料合成[D].长沙:湖南大学,2016.

SALIHOGLU G, SALIHOGLU N K. A review on paint sludge from automotive industries:generation, characteristics and management[J]. Journal of Environmental Management, 2016,169:223-235.

黄丹丹. 浅谈水性涂料环境影响分析[J].广东化工,2019,46(17):134,131.

钱晓荣,董锐,唐帆,等. 油漆废渣处理技术综述[J]. 工业安全与环保,2015,41(2):52-55

,102.

李运德. 常温固化FEVE氟碳涂料结构与性能研究及高性能FEVE氟碳涂料的制备[D].北京:北京化工大学,2009.

刘文杰. 水性带锈防锈涂料的制备与性能研究[D].广州:华南理工大学,2014.

王玉琼. 水性有机富锌底漆的制备与性能研究[D].广州:华南理工大学,2010.

聂伟安,龙立平,熊文高,等. 毛细管气相色谱法同时测定油漆溶剂中二甲苯和乙二醇乙醚乙酸酯[J]. 化学分析计量,2006,15(4):48-49.

彭园花,杨波. 浅谈喷漆的主要污染物及处理措施[J]. 广州化工,2012,40(17):130-131.

王海涛,奥德,吕美婵,等. 水性涂料生产废水的深度处理及资源化利用研究进展[J]. 现代化工,2019,39(增刊1):45-48.

于全蕾,栾俊,刁朔. 轨道交通客车用水性涂料有害物质研究[J]. 铁道车辆,2019,57(12):29-32

,5.

张禾. 喷漆废气废漆渣的估算及处理措施[J]. 汽车工艺与材料,2006(11):28-32.

胡锦华. 城市建筑室内环境对儿童健康风险的影响研究[D].长沙:湖南大学,2017.

王英彪,张衍国,吴占淞. 有机热载体油漆废渣焚烧炉的设计[J]. 节能与环保,2002(8):32-34.

王晓峰,周恭明,曹瀚,等. 油漆渣焚烧酸性气体的控制分析[J]. 环境技术,2005,24(3):7-10.

于国玲,赵万赛,刘云凡,等. 涂料三废处理及研究进展[J]. 上海涂料,2019,57(4):26-30.

ZHANG Q, MA P, YANG Y, et al. Reinforcement of recycled paint slag hybrid-filled lightweight calcium sulphate whisker/PVC foam composites[J]. Journal of Environmental Chemical Engineering, 2018, 6(1):520-526.

钱晓荣,唐帆,董悦,等. 微生物降解油漆废渣技术综述[C]//2014中国环境科学学会学术年会,成都,2014.

SALIHOGLU NK, UCAROGLU S, SALIHOGLU G, et al. Bioconversion of industrial wastes:paint sludge from automotive manufacturing[J]. Journal of Material Cycles and Waste Management, 2018, 20(4):2100-2109.

ROSLI N L, ABD RAHMAN N, KADRI A, et al. Methane synthesis from automotive paint sludge via microwave assisted pyrolysis[J]. IOP Conference Series:Materials Science and Engineering, 2018, 358(1):012029.

邹恩平,雍毅,吴怡,等. 废旧油漆桶清洗回收工艺及其成本分析[J]. 四川环境,2017,36(增刊1):13-16.

徐学萍. 水热法和芬顿氧化法处理油漆废渣的工艺研究[D].上海:华东理工大学,2019.

汤旭东. PET水热降解过程的工艺及动力学规律研究[D]. 长春:长春工业大学,2019.

游继光,李响,薛罡,等. 涂料废渣水热减量及其产物特性[J]. 环境工程学报,2018,12(5):1557-1564.

胡庆荣. 水性涂料废渣利用及废水废气处理技术[J]. 云南化工,2018,45(7):145-146.

彭开美,涂伟萍. 水性涂料废渣利用及废水废气处理技术[J]. 中国涂料,2015,30(6):7-11

,20.

付琬璐,史胜南,李娜,等. 钢结构防腐涂料的研究现状及发展方向[J]. 辽宁化工,2017,46(7):731-734

,8.

沙之杰. 低碳经济背景下的中国节能减排发展研究[D]. 成都:西南财经大学,2011.

黄世栋. 垃圾焚烧处理及二次污染的控制[J]. 引进与咨询,2006(6):48-49.

乔红斌,王华锋,张庆峰. 生活垃圾焚烧电厂二次污染物防治措施探讨[J]. 煤炭工程,2004(9):51-52.

李明哲,黄正宏,康飞宇. 挥发性有机物的控制技术进展[J]. 化学工业与工程,2015,32(3):2-9.

徐薇. 化工行业VOCs废气治理技术应用现状和讨论[J]. 资源节约与环保,2019(10):88-89.

张广宏,赵福真,季生福,等. 挥发性有机物催化燃烧消除的研究进展[J]. 化工进展,2007,26(5):624-631.

张永明,邓娟,梁健等. 工业源VOCs末端治理技术浅析及减排展望[J]. 环境影响评价,2018,40(3):46-50.

谢飞. 危险废物填埋项目环境保护验收监测注意问题[J]. 中国资源综合利用,2011,29(2):39-41.

周元祥. 安徽铜陵典型尾矿库地球化学和环境地球化学效应[D]. 合肥:合肥工业大学,2009.

孙立文. 垃圾焚烧厂周边土壤典型重金属的环境归趋与累积模型[D]. 桂林:广西师范大学,2015.

姚庆华. 化工废渣填埋场的防渗[J]. 石油化工安全环保技术,2007,23(2):52-55.

坂口瞬,林敏明. 有机溶剂回收系统及有机溶剂回收方法:CN110035816A[P].2019-07-19.

唐源欣. 一种有机溶剂回收系统及其回收方法:CN108144408A[P].2018-06-12.

唐新宇,黄庆. 一种利用轮毂漆渣制备水泥替代燃料的方法:CN108531237A[P]. 2018-09-14.

DALMAZZO D, VERCELLI A, SANTAGATA E, et al. Rheological characterization and performance-related evaluation of paint sludge modified binders[J]. Materials and Structures, 2016, 50(1):74.

陈善堂. 一种油漆渣的再生利用装置及使用方法:CN108889760A[P].,2018-11-27.

涂伟萍,程建华. 涂料生产与涂装过程中废气排放与治理[J]. 中国涂料,2013,28(2):19-24.

谢素龙. 水性涂料"三废"处理技术[J]. 化工设计通讯,2018,44(3):196-197.

胡天觉. 城市有机固体废物仓式好氧堆肥工艺改进及理论研究[D]. 长沙:湖南大学,2005.

唐先进. 固废拆解地区农田土壤多氯联苯污染调查与生物修复研究[D]. 杭州:浙江大学,2011.

TIAN Y Q, CHEN L M, GAO L H, et al. Composting of waste paint sludge containing melamine resin as affected by nutrients and gypsum addition and microbial inoculation[J]. Environmental Pollution, 2012, 162:129-137.

TIAN Y Q, CHEN L M, GAO L H, et al. Composting of waste paint sludge containing melamine resin and the compost's effect on vegetable growth and soil water quality[J]. Journal of Hazardous Materials, 2012, 243:28-36.

宋成芳. 生物质催化热解炭化的试验研究与机理分析[D]. 杭州:浙江工业大学,2013.

李建芬. 生物质催化热解和气化的应用基础研究[D]. 武汉:华中科技大学,2007.

袁园,汪晓雷. 漆渣的循环再利用[J]. 再生资源与循环经济,2015,8(1):34-37.

钱原吉,吴占松. 油漆废渣的热解特性与热解工艺[J]. 清华大学学报(自然科学版),2008,48(2):236-239.

KIM B R, KALIS E M, SALMEEN I T, et al. Evaluating paint-sludge chars for adsorption of selected paint solvents[J]. Journal of Environmental Engineering, 1996, 122(6):532-539.

Relative Articles

Supplements(0)

Cited By

Proportional views