LI Xingwu, YUAN Shushan, YE Han, WANG Zhongyi, OUYANG Lan, LIANG Sha, HU Jingping, YANG Jiakuan. ANALYSIS OF FLUE GAS CHARACTERISTICS AND PROCESS OPTIMIZATION OF CEMENT KILN CO-PROCESSING MUNICIPAL SLUDGE BASED ON ASPEN PLUS[J]. ENVIRONMENTAL ENGINEERING , 2024, 42(5): 206-214. doi: 10.13205/j.hjgc.202405026
Citation:
LI Xingwu, YUAN Shushan, YE Han, WANG Zhongyi, OUYANG Lan, LIANG Sha, HU Jingping, YANG Jiakuan. ANALYSIS OF FLUE GAS CHARACTERISTICS AND PROCESS OPTIMIZATION OF CEMENT KILN CO-PROCESSING MUNICIPAL SLUDGE BASED ON ASPEN PLUS[J]. ENVIRONMENTAL ENGINEERING , 2024, 42(5): 206-214. doi: 10.13205/j.hjgc.202405026
LI Xingwu, YUAN Shushan, YE Han, WANG Zhongyi, OUYANG Lan, LIANG Sha, HU Jingping, YANG Jiakuan. ANALYSIS OF FLUE GAS CHARACTERISTICS AND PROCESS OPTIMIZATION OF CEMENT KILN CO-PROCESSING MUNICIPAL SLUDGE BASED ON ASPEN PLUS[J]. ENVIRONMENTAL ENGINEERING , 2024, 42(5): 206-214. doi: 10.13205/j.hjgc.202405026
Citation:
LI Xingwu, YUAN Shushan, YE Han, WANG Zhongyi, OUYANG Lan, LIANG Sha, HU Jingping, YANG Jiakuan. ANALYSIS OF FLUE GAS CHARACTERISTICS AND PROCESS OPTIMIZATION OF CEMENT KILN CO-PROCESSING MUNICIPAL SLUDGE BASED ON ASPEN PLUS[J]. ENVIRONMENTAL ENGINEERING , 2024, 42(5): 206-214. doi: 10.13205/j.hjgc.202405026
In this study, a simulation model of cement kiln co-processing municipal sludge technology was developed by Aspen Plus. Based on the case that the daily production of clinker was 10000 t/d, the model aimed to analyze the effect of the changes in feed rate and sludge moisture content on flue gas emission law, the calciner’s temperature and coal consumption. The results showed that when the moisture content of sludge remained at 60%, and the feed rate of sludge ranged from 1 t/d to 20 t/d, the concentration of NO and SO2 in flue gas changed from 205.5 mg/m3 and 26.5 mg/m3 to 56.7 mg/m3 and 26.8 mg/m3, respectively. When the feed rate of sludge remained at 10 t/d, and the moisture content of sludge ranged from 10% to 90%, the concentration of NO decreased from 136.5 mg/m3 to 133.1 mg/m3 and then increased to 134.6 mg/m3, while the concentration of SO2 decreased from 27.4 mg/m3 to 26.2 mg/m3. 50% was the critical moisture content of sludge for the changes in the calciner’s temperature and coal consumption. Higher moisture content decreases the temperature and increases consumption, while the opposite is true for lower moisture content. According to simulation results, it is proposed that by maintaining the calciner temperature within the range of 880~905 ℃, the moisture content of sludge can be controlled at 45%~63%, thereby ensuring a sludge feed rate of 20 t/h. The optimized production parameters are proposed to provide a reference for current technology optimization.
XIAO X, TAN J K, YUAN J K, et al. Dual role of O2 concentration on the reducing gases produced and NO reduction during sewage sludge combustion in pilot scale cement precalciner[J]. Waste Management, 2022, 137: 100-109.
ZHANG Y, CAO S X, SHAO S, et al. Aspen Plus-based simulation of a cement calciner and optimization analysis of air pollutants emission[J]. Clean Technologies and Environmental Policy, 2011, 13(3): 459-468.
[6]
KÄÄNTEE U, ZEVENHOVEN R, BACKMAN R, et al. Cement manufacturing using alternative fuels and the advantages of process modelling[J]. Fuel Processing Technology, 2004, 85(4): 293-301.
[7]
周友坤. 水泥窑炉掺烧污泥多污染物生成过程仿真及控制[D]. 广州: 华南理工大学, 2021.
[8]
RAHMAN A, RASUL M G, KHAN M M K, et al. Aspen plus based simulation for energy recovery from waste to utilize in cement plant preheater tower[J]. Energy Procedia, 2014, 61: 922-927.
[9]
UDARA S P R A, KOHILAN R, LAKSHAN M A L, et al. Simulation of carbon dioxide capture for industrial applications[J]. Energy Reports, 2020, 6(2): 659-663.
FANG P, TANG Z J, HUANG J H, et al. Using sewage sludge as a denitration agent and secondary fuel in a cement plant: a case study[J]. Fuel Processing Technology, 2015, 137: 1-7.